Is flexconnect support P2P blocking?

omer shtivi — Mon, 05 Jul 2021 08:36:35 GMT

Hello,

Is access-point in flexconnect mode support P2P blocking?

Thanks

HiYes, it is supported. Here

Rasika Nayanajith — Mon, 29 Sep 2014 19:35:40 GMT

Yes, it is supported. Here is the 8.0 config guide information related to P2P blocking feature where it listed limitations of that as well.

1. In controller software releases prior to 4.2, the controller forwards Address Resolution Protocol (ARP) requests upstream (just like all other traffic). In controller software release 4.2 or later releases, ARP requests are directed according to the behavior set for peer-to-peer blocking. 2. Peer-to-peer blocking does not apply to multicast traffic. 3. If you upgrade to controller software release 4.2 or later releases from a previous release that supports global peer-to-peer blocking, each WLAN is configured with the peer-to-peer blocking action of forwarding traffic to the upstream VLAN. 4. In FlexConnect, solution peer-to-peer blocking configuration cannot be applied only to a particular FlexConnect AP or a subset of APs. It is applied to all FlexConnect APs that broadcast the SSID. Unified solution for central switching clients supports peer-to-peer upstream-forward. However, this is not supported in the FlexConnect solution. This is treated as peer-to-peer drop and client packets are dropped. 5. Unified solution for central switching clients supports peer-to-peer blocking for clients associated with different APs. However, this solution targets only clients connected to the same AP. FlexConnect ACLs can be used as a workaround for this limitation.

HTH

Rasika

**** Pls rate all useful responses ****

Unified solution for central

mohanak — Wed, 01 Oct 2014 13:55:14 GMT

Unified solution for central switching clients supports peer-to-peer upstream-forward. However, this is not supported in the FlexConnect solution. This is treated as peer-to-peer drop and client packets are dropped.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_01001100.html

topic Is flexconnect support P2P blocking? in Wireless

Is flexconnect support P2P blocking?

HiYes, it is supported. Here

Unified solution for central