topic Can't turn on radio for AP1131. Here is what the screen looks like in Wireless

Can't turn on radio for AP1131. Here is what the screen looks like

modenhei — Sat, 03 Jul 2021 22:26:50 GMT

The manual does not tell me how to turn the radio on. The product ships with the radio off

Re: Can't turn on radio for AP1131. Here is what the screen look

Rob Huffman — Sun, 24 Feb 2008 18:30:26 GMT

Hi Michael,

You have to configure a SSID first, then you should be able to turn up the Radio/Radio's;

Changes to the Default Configuration-Radios Disabled and No Default SSID

In this release, the radio or radios are disabled by default, and there is no default SSID. You must create an SSID and enable the radio or radios before the access point will allow wireless associations from other devices. These changes to the default configuration improve the security of newly installed access points.

http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/b38jebrn.html#wp147963

Hope this helps!

Rob

Re: Can't turn on radio for AP1131. Here is what the screen look

modenhei — Sun, 24 Feb 2008 19:11:07 GMT

Yes, that worked. Thank you

Re: Can't turn on radio for AP1131. Here is what the screen look

Rob Huffman — Mon, 25 Feb 2008 00:51:35 GMT

Hi Michael,

You are most welcome 🙂 Glad to be of some small help.

Take care,

Rob