topic i tried this method before, in Wireless

Local PSK authentication in flexconnect standalone mode

Eddy Christian — Mon, 05 Jul 2021 13:14:40 GMT

Hi,

Is there a way for flexconnect AP in standalone mode (disconnected from WLC) to do local PSK authentication for an SSID?

I'm looking for the configuration guide on this and not sure if "ap local authentication in flexconnect profile" is the setup that i'm looking for.

Thanks

Have a look below post, it

Rasika Nayanajith — Mon, 19 Dec 2016 23:09:09 GMT

Have a look below post, it should help

https://mrncciew.com/2013/03/10/h-reap-modes-of-operation/

Note that "H-REAP" is previous marketing term to "FlexConnect"

HTH

Rasika

*** Pls rate all useful responses ***

i tried this method before,

Eddy Christian — Tue, 20 Dec 2016 02:17:46 GMT

i tried this method before, but somehow it doesn't work (flexconnect local auth under SSID config).

client are not able to join the ssid.

i have flexconnect group with "ap local authentication enabled", but i don't want to use EAP/PEAP locally from the AP. i want to keep using PSK for the SSID even when my AP is disconnected from WLC. Any idea how to achieve this?