topic Mobilty Group and re-authentication in Wireless

Mobilty Group and re-authentication

dcarr3311 — Sun, 04 Jul 2021 05:32:35 GMT

Hello All

I have to WLC's a 4402 and 5508 in a mobilty group. they are both running 7.0.116.0. They are configured to use Web Authentication. We are having complaints that Users are having to re-authenticate when moving around the office. My theory is they are moving from one WLC to the other and then requiring to re-authenticate. Is this what others are seeing? and is this working as designed.?

thanks for your help

Dan

Mobilty Group and re-authentication

George Stefanick — Thu, 16 Aug 2012 19:16:58 GMT

yes sounds like it to me

Make sure the mobility groups have all your WLCs in it. Are your aps on both controllers or just one?

Mobilty Group and re-authentication

dcarr3311 — Thu, 16 Aug 2012 19:24:08 GMT

AP's are split between both controllers.

Mobilty Group and re-authentication

George Stefanick — Thu, 16 Aug 2012 19:40:07 GMT

Do you have enough room one 1 WLC for all the APs? If so, test your theory.

Mobilty Group and re-authentication

nikhilcherian — Fri, 17 Aug 2012 02:34:43 GMT

Did you try changing the IDLE timeouts and the session timeouts

Re: Mobilty Group and re-authentication

Scott Fella — Fri, 17 Aug 2012 02:55:03 GMT

I would do what nikhilcherian posted, because devices in the run state will be able to roam to another wlc (mobility and interface the same) without having to re-authenticate. But like George mentioned, test it out yourself... Don't listen to users:)

Sent from Cisco Technical Support iPad App