topic Yes steve thanks for in Wireless

How to configuration Cisco Aironet 1602i as dhcp server?

jmp780718 — Mon, 05 Jul 2021 08:17:47 GMT

Hi everyone.

Someone have the configuration procedure to configure the Cisco Aironet 1602I as dhcp server?

Thank you

Note When you configure the

mohanak — Wed, 30 Jul 2014 10:15:25 GMT

Note When you configure the access point as a DHCP server, it assigns IP addresses to devices on its subnet. The devices communicate with other devices on the subnet but not beyond it. If data needs to be passed beyond the subnet, you must assign a default router. The IP address of the default router should be on the same subnet as the access point configured as the DHCP server.

https://supportforums.cisco.com/document/18871/dhcp-server-configuration-cisco-aironet-1100-and-1200-series-ap

the configuration is same on 1602 AP.

Check this post from Steve:

Sandeep Choudhary — Wed, 30 Jul 2014 13:35:06 GMT

Check this post from George:

http://www.my80211.com/cisco-auton-cli-commands/2010/3/8/autonomous-configure-a-cisco-ap-to-provide-dhcp-services.html

Regards

That's George's site Sandeep.

Stephen Rodriguez — Wed, 30 Jul 2014 13:35:07 GMT

That's George's site Sandeep.

Yes steve thanks for

Sandeep Choudhary — Wed, 30 Jul 2014 15:35:33 GMT

Yes steve thanks for correction.