topic Re: Aironet start in Wireless https://community.cisco.com/t5/wireless/aironet-start/m-p/1564511#M142427 <HTML><HEAD></HEAD><BODY><P>Hi Mehmood</P><P></P><P>Do you have a AP 1310 on the other end of the bridge showing the same symptoms or that AP shows itself as connected. As a test if you increase the session timeout under the radio interface, by issuing the command below does it help.</P><P>AP#config t</P><P>AP#interface dot11r0</P><P>AP#timeout absolute &lt;0-71528&gt; in minutes</P></BODY></HTML> Thu, 21 Oct 2010 16:15:26 GMT nmajeed 2010-10-21T16:15:26Z Aironet start https://community.cisco.com/t5/wireless/aironet-start/m-p/1564510#M142426 <P>HI</P><P></P><P><SPAN style="background-color: #f8fafd;">I have Wireless Aironet 1300, am using it for a backup purpose, when i leave it with no traffic for 3 days or more it go in an IDL mode where it is not reachable from anywhere. </SPAN></P><P></P><P><SPAN style="background-color: #f8fafd;">any Idea </SPAN></P> Sun, 04 Jul 2021 02:18:58 GMT https://community.cisco.com/t5/wireless/aironet-start/m-p/1564510#M142426 alseddiqi 2021-07-04T02:18:58Z Re: Aironet start https://community.cisco.com/t5/wireless/aironet-start/m-p/1564511#M142427 <HTML><HEAD></HEAD><BODY><P>Hi Mehmood</P><P></P><P>Do you have a AP 1310 on the other end of the bridge showing the same symptoms or that AP shows itself as connected. As a test if you increase the session timeout under the radio interface, by issuing the command below does it help.</P><P>AP#config t</P><P>AP#interface dot11r0</P><P>AP#timeout absolute &lt;0-71528&gt; in minutes</P></BODY></HTML> Thu, 21 Oct 2010 16:15:26 GMT https://community.cisco.com/t5/wireless/aironet-start/m-p/1564511#M142427 nmajeed 2010-10-21T16:15:26Z