topic Re: MS-PEAP with windows zero configuration problem in Wireless

MS-PEAP with windows zero configuration problem

ccr_cisco — Sat, 03 Jul 2021 20:23:29 GMT

Hello,

Here is my configuration

1130 AP, WLSE Express (radius)

authentication : PEAP with ms-chapv2

My user database is on the WLSE.

MS-Peap works fine with my intel pro/wireless client but always failed with the integrated WZC client on XP SP2. I already patch it with KB885453 but this doesn't help.

Is there some specials parameters on the radius to make it works with WZC ?

Thanks for your help

Re: MS-PEAP with windows zero configuration problem

robert.wright — Mon, 18 Dec 2006 16:58:37 GMT

review your log files, you may not have the client configured correctly... Possibly set the wrong certificate.

Re: MS-PEAP with windows zero configuration problem

mattgraham — Thu, 15 Mar 2007 21:42:30 GMT

Untick the option to verify certificate in the windows config. PEAP is server side, client can ignore it. Also, check if you are trying to use windows initial login - if so, machine authentication must be enabled.

Hope that helps.

Re: MS-PEAP with windows zero configuration problem

k.rouwette — Fri, 13 Jul 2007 08:33:51 GMT

I have the same problem with the integrated WZC client on XP SP2. The intel pro/wireless client works fine. You have know any solutions?

Re: MS-PEAP with windows zero configuration problem

ccr_cisco — Fri, 13 Jul 2007 12:00:50 GMT

Hi,

Yes I found the solution.

WZC is not CCX compatible so you have to disable or make optional cckm on the APs with this command :

authen key-manage cckm optional

Bye

Re: MS-PEAP with windows zero configuration problem

Tue, 17 Jul 2007 18:20:14 GMT