topic Hi guys, I apologize for my in Wireless

Configuring WPA2 in CISCO AIRONET AP

davidberdugo7 — Mon, 05 Jul 2021 07:52:36 GMT

I'm tconfiguring a new Aironet 1142 wireless access point with the web
configuration utility. I only need a simple single SSID, no VLANs, and a
WPA2 autentication password (I can't let it with a 128 bits wep password
because the ap is for normal random users). The thing is that when im
configuring the wpa it ask me for a radius server... and I just need a
simple access point. If you guys can help me with the cli or web configuration
I'll be grateful

Do check this guide its a

kaaftab — Wed, 21 May 2014 14:56:08 GMT

Do check this guide its a basic config guide as required

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1140/autonomous/getting_started/guide/ap1140aut_getstart.html

***********Do rate helpful links************************

I already have configured

davidberdugo7 — Wed, 21 May 2014 15:13:09 GMT

I already have configured those parameters, but what I need is a simple WPA password authentication, and those options always take me to the radius configuration somehow... can be done? what I want? configure wpa like a normal AP?

you need to configure static

kaaftab — Wed, 21 May 2014 15:44:53 GMT

you need to configure static WEP with static key

http://networking-newbie.blogspot.com/2008/11/configuring-wpa-and-wpa2-on-cisco.html

check this link for command line configuration

http://networking-newbie.blogspot.com/2008/11/configuring-wpa-and-wpa2-on-cisco.html

Note:

donot select this it mean different here

WPA—Wi-Fi Protected Access (WPA) permits wireless access to users authenticated against a database through the services of an authentication server and encrypts their IP traffic with stronger algorithms than those used in WEP. As with EAP authentication, you must enter the IP address and shared secret for an authentication server on your network (server authentication port 1645).

Hi,What type of security do

Christos Stefaneskou — Thu, 22 May 2014 21:59:27 GMT

Hi,

What type of security do you want to use?

PSK (preshared key,just a static password) or 8021.X authentication?

Regards

Hi, Configure your AP as

abwahid — Wed, 03 Sep 2014 06:54:49 GMT

Hi,

Configure your AP as autonomous AP and then select the security mode WPA-Personal instead of WPA-Enterprise.

http://www.cisco.com/c/en/us

Moin Ilyas — Tue, 16 Sep 2014 18:15:35 GMT

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap10-cipherwep.html

Refer the link : http://www

mohanak — Wed, 17 Sep 2014 11:27:36 GMT

Refer the link : http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/67134-wpa2-config.html

Refer the autonomous confg.

Saurav Lodh — Fri, 19 Sep 2014 01:44:03 GMT

Refer the autonomous confg. from

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1140/autonomous/getting_started/guide/ap1140aut_getstart.html#wp33244

Hi guys, I apologize for my

davidberdugo7 — Wed, 03 Dec 2014 22:25:01 GMT

Hi guys, I apologize for my late response, I figured out how to configure the AP, I will share the configuration when I get home.

Hi guys, I apologize for my

davidberdugo7 — Wed, 03 Dec 2014 22:25:29 GMT

Hi guys, I apologize for my late response, I figured out how to configure the AP, I will share the configuration when I get home.

Hi guys, I apologize for my

davidberdugo7 — Wed, 03 Dec 2014 22:26:01 GMT

Hi guys, I apologize for my late response, I figured out how to configure the AP, I will share the configuration when I get home.