topic HI colin,1. Did you enabled in Wireless

Certain machines cannot see broadcasted SSID

Colin Higgins — Mon, 05 Jul 2021 07:50:34 GMT

I created a guest wireless network on my 5508 controller (uses default a/n), and it is set to broadcast the SSID

Almost everyone can see this network SSID: my Mac sees it right away, and I can join it and surf the web all day.

Two Windows laptops had an issue seeing the SSID --it wouldn't show up when they scanned for wireless networks. One of these was corrected when the machine was updated to Windows 8.1

The other is a HP laptop running Windows 7. Even though we did some updates, the machine can't see the SSID. Even if I pace the machine within 10 feet of the AP, nothing. The user's Android phone sees the SSID no problem.

Since this client is never joining the network, I have little to go by (no logs).

Has anyone seen this? What could be the issue?

Please reimage the laptop.

Ravi Singh — Tue, 20 May 2014 16:36:52 GMT

Please reimage the laptop. your problem will resolve.

Please re-image the laptop

Ravi Singh — Tue, 20 May 2014 16:39:04 GMT

Please re-image the laptop your problem will resolve

try refreshing the networks

Abha Jha — Wed, 21 May 2014 07:20:51 GMT

try refreshing the networks on client machine..

try updating software.

try creating another ssid on controller and broadcasting it....and see if that helps..

HI colin,1. Did you enabled

Sandeep Choudhary — Wed, 21 May 2014 08:12:57 GMT

HI colin,

1. Did you enabled all radios ?

2. Did the client(windws lapi) support 802.11a and 802.11b radio(2.4/ 5 Ghz).

3. If above both points are ok then check the driver of the machine and try to update.

also paste the sh wlan out put here.

Check these and let us know the outcome.

Regards

Dont forget to rate helpful posts

we are in the process of

Colin Higgins — Thu, 22 May 2014 15:44:19 GMT

we are in the process of doing that--I will let you know if it works

You can also try making sure

dhurshowy — Thu, 22 May 2014 21:19:57 GMT

You can also try making sure you are using channel 149-161 or 36-48. (I believe you said you are using the a/n band (5GHz)). Some devices may not work on all channels, it's rare but happens (even my smart phone had that problem with my home router).

Please try to re-image the

Abhishek Abhishek — Thu, 29 May 2014 19:44:51 GMT

Please try to re-image the laptop and check it again if it works.

Sounds like your device has a

jmeachum — Sat, 31 May 2014 03:36:33 GMT

Sounds like your device has a b/g/n radio --- no a/n. You will need to enable the SSID on the 2.4Ghz radio.

I hope this helps.

John