topic Create an SSID Beacon in Wireless

Create an SSID Beacon

bosanquetk — Sun, 04 Jul 2021 06:48:32 GMT

Does anyone know the best way to create an SSID beacon?

All I want to create is a device which only transmits an SSID beacon which can be configured. Some of the criteria are;

Range - ~10m
No wireless receive
2.4GHz range
Configurable items
- SSID
- Transmit period (e.g. Tx for 1sec)
- Break period (e.g. No tx for 5secs)

Can anyone offer any guidance on this?

Create an SSID Beacon

Stephen Rodriguez — Thu, 28 Mar 2013 15:56:58 GMT

You are looking to craft a packet?

To what purpose? and please be very very VERY specific.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Create an SSID Beacon

bosanquetk — Thu, 28 Mar 2013 17:39:43 GMT

I dont want to create a new packet, I just want to turn off all the other elements apart from the SSID broadcast.

The purpose is for a little home project I am working on.

All I need to create is a stripped down device to only transmit a beacon in the same format as an SSID so that it can be recognised by a wifi enabled device without any hardware or software modification. No connectivity is required.

Create an SSID Beacon

Stephen Rodriguez — Thu, 28 Mar 2013 18:15:12 GMT

While I do not know how to do this myself, I would caution you to be very careful with this.

the potential for DOS attacks is very high, and I for one would not one someone to point back to these forums saying that this is where they learned/heard how to do it.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Create an SSID Beacon

bosanquetk — Thu, 28 Mar 2013 22:06:32 GMT

Thats ok, there was no malicious intent in the request.

I will keep up my research to get this project up and working though.

Thanks.

Karl.