AP 1130G; BVI interface.

luyenntk50db — Mon, 05 Jul 2021 07:30:51 GMT

i have a configuration for AP 1130G. I know ssid for identified Vlan ID. bridge-group for allowed bridge-group_id = vlan_ID accessed.

But i don't know "interface dot11radio1.41 encapsulation dot1Q 20, howerver config bridge-group 41". Pls explain this command.

And pls explain config as below:

dot11 ssid A
vlan 20
!

interface Dot11Radio1.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1

interface Dot11Radio1.41
encapsulation dot1Q 20
no ip route-cache
bridge-group 41

interface FastEthernet0.1
encapsulation dot1Q 1 native
bridge-group 1
!
interface FastEthernet0.41
encapsulation dot1Q 20
bridge-group 41

!
interface BVI1
ip address 10.96.20.22 255.255.255.0
no ip route-cache

HI ,It should be :interface

Sandeep Choudhary — Mon, 24 Mar 2014 07:16:37 GMT

HI ,

It should be :

interface Dot11Radio1.41
~~encapsulation dot1Q 20~~

encapsulation dot1Q 41 ---> Enable a VLAN on the radio interface. (Optional) Designate the VLAN as the native VLAN. On many networks, the native VLAN is VLAN 1

no ip route-cache
bridge-group 41

Regards

Dont forget to rate helpful posts

topic AP 1130G; BVI interface. in Wireless

AP 1130G; BVI interface.

HI ,It should be :interface