topic Wireless Lan Controller 2500 in Wireless

Wireless Lan Controller 2500

Akaffou Aristide Akaffou — Sun, 04 Jul 2021 08:13:33 GMT

hello,

I want to configure a wireless lan controller 2500 which reside on a different subnet than some Access points. Is it possible?

Wireless Lan Controller 2500

Stephen Rodriguez — Wed, 06 Nov 2013 17:31:10 GMT

yes, this is achievable so long as you have L3 reachability between the AP and the WLC

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Wireless Lan Controller 2500

Daniel Ordóñez Flores — Wed, 06 Nov 2013 17:32:54 GMT

Hi Akaffou.

Yes co can do it, you can use DHCP option 43 and other methods.

Please check this links

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00808714fe.shtml

Wireless Lan Controller 2500

Akaffou Aristide Akaffou — Wed, 06 Nov 2013 17:51:05 GMT

Thank you Daniel, this is the part number of my access points: AIR-CAP3602E-A-K9, Is it possible with this access points.

Wireless Lan Controller 2500

Akaffou Aristide Akaffou — Wed, 06 Nov 2013 17:52:21 GMT

Thank you stephen,

this is the part number of my access points:

AIR-CAP3602E-A-K9, Is it possible with this access points?

Re: Wireless Lan Controller 2500

Scott Fella — Wed, 06 Nov 2013 17:54:40 GMT

The answer is yes. Take a look at the links that was posted in the previous post.

Sent from Cisco Technical Support iPhone App

Wireless Lan Controller 2500

Daniel Ordóñez Flores — Wed, 06 Nov 2013 17:56:21 GMT

Yes you can

Wireless Lan Controller 2500

Akaffou Aristide Akaffou — Wed, 06 Nov 2013 18:03:14 GMT

Thank you Scott

Wireless Lan Controller 2500

Abha Jha — Wed, 06 Nov 2013 19:07:42 GMT

There are many ways to discover AP :-

Methods for discovering an AP

A lightweight access point can be discovered in the following ways:

Layer 3 LWAPP discovery: This discovery occurs when the LWAP is on a different subnet from the WLC and the AP uses the IP address rather than the Layer 2 MAC address.
Layer 2 LWAPP discovery: This discovery occurs when the LWAP and WLC are on the same subnet and the discovery data is placed in Ethernet frames that contain the MAC addresses of the two devices.
Layer 2 LWAPP discovery cannot be used in Layer 3 environments.