topic 5508 Foreign controller and 4400 Anchor controller in Wireless

5508 Foreign controller and 4400 Anchor controller

mcaoile — Sun, 04 Jul 2021 07:09:58 GMT

Hi,

We have a customer that have 2 5508 as primary and backup controller and a 4400 as an anchor controller. We plan to upgrade the 5508 to 7.3.112.0 and the 4400 is already 7.0.116.0. Will there be any issue if the anchor controller is not the same code as the foreign controller? Do I also have to upgrade the acnhor controller to 7.0.240.0?

Regards,

5508 Foreign controller and 4400 Anchor controller

Chris Illsley — Mon, 03 Jun 2013 09:11:46 GMT

You should be fine as you are using versions of the 7.x code.

There are various bugs in 7.0.116.0 so upgrading wouldn;t be a bad idea.

Cheers

Chris

Re: 5508 Foreign controller and 4400 Anchor controller

Scott Fella — Mon, 03 Jun 2013 11:16:18 GMT

Here is a link to the inter release controller mobility matrix to keep handy

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html#wp123314

Sent from Cisco Technical Support iPhone App