topic Enabling netflow on a 2504 controller in Wireless

Enabling netflow on a 2504 controller

drumrb0y — Sun, 04 Jul 2021 06:39:26 GMT

I just completed setting up a AIR-CT2504-K9 controller with 9 APs with RADIUS on the private WLAN and an open guest WLAN; I want to enable netflow exports to a collector, but see no place in the GUI to do this and no obvious CLI commands.

Could someone please point me in the right direction?

Thanks,

Enabling netflow on a 2504 controller

Scott Fella — Fri, 01 Mar 2013 20:52:19 GMT

Is this what you are looking for?

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

Re: Enabling netflow on a 2504 controller

Noovi — Mon, 17 Jun 2019 04:59:22 GMT

Hi,

Any URLs for enabling netflow command on Cisco 2504 via CLI.

Re: Enabling netflow on a 2504 controller

Scott Fella — Mon, 17 Jun 2019 16:54:53 GMT

Take a look at this link as it should help:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/b_cg85/wireless_quality_of_service.html#d150928e20868a1635