topic Re: Backing up controller in Wireless

Backing up controller

mshelton1 — Sun, 04 Jul 2021 06:38:55 GMT

What is a good method to backup the wism configuration in case you need to replace the card and restore configuration.

Sent from Cisco Technical Support Android App

Backing up controller

Scott Fella — Thu, 28 Feb 2013 20:35:02 GMT

TFTP or FTP the config off the WLC. That is the best way. If you have WCS/NCS or Prime Infrastructure, you can have that perform a backup to a tftp of FTP.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

Backing up controller

Stephen Rodriguez — Thu, 28 Feb 2013 20:41:05 GMT

from the GUI, you can do an upload of the config.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Re:Backing up controller

mshelton1 — Fri, 01 Mar 2013 02:52:28 GMT

Well this is to be automated. Any ideas?

Sent from Cisco Technical Support Android App

Backing up controller

Leo Laohoo — Fri, 01 Mar 2013 03:05:05 GMT

WCS/NCS/CPI will automate the backing up of your config.

Re: Backing up controller

Scott Fella — Fri, 01 Mar 2013 03:10:01 GMT

Like mentioned earlier, you either manually backup the WLC or you need WCS, NCS, or Prime.

Sent from Cisco Technical Support iPhone App

Backing up controller

maldehne — Fri, 01 Mar 2013 05:35:55 GMT

Find the links needed:

WCS:

http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0admin.html#wpmkr1191969

the task of interest is controller configuration backup

NCS:

http://www.cisco.com/en/US/partner/docs/wireless/ncs/1.0/configuration/guide/admin.html#wp1356996

--------------------------------------------------------------------------------------------------

Please Don't forget to rate correct answers

Re:Backing up controller

mshelton1 — Fri, 01 Mar 2013 23:26:34 GMT

Ok I reviewed the guide and it only mention doing upload and downloading files. But it doesn't show how to set it up to do automated backup of configuration or am I missing something.

Sent from Cisco Technical Support Android App