topic 4404 Controller compatibility with Nexus in Wireless https://community.cisco.com/t5/wireless/4404-controller-compatibility-with-nexus/m-p/2068263#M148927 <P>I have two questions - </P><P>1) Is it possible to connect Cisco 4404 Controller (or ny other controller) to Nexus 7K series.</P><P>2) If yes, then what will be the configuration. Will it be similar to l<EM>ink Aggregation </EM>with Catalyst <EM>6500 Neighbor Switch</EM>. </P><P></P><P>Regards,</P><P>HT</P> Sun, 04 Jul 2021 05:48:13 GMT hi2himanshu 2021-07-04T05:48:13Z 4404 Controller compatibility with Nexus https://community.cisco.com/t5/wireless/4404-controller-compatibility-with-nexus/m-p/2068263#M148927 <P>I have two questions - </P><P>1) Is it possible to connect Cisco 4404 Controller (or ny other controller) to Nexus 7K series.</P><P>2) If yes, then what will be the configuration. Will it be similar to l<EM>ink Aggregation </EM>with Catalyst <EM>6500 Neighbor Switch</EM>. </P><P></P><P>Regards,</P><P>HT</P> Sun, 04 Jul 2021 05:48:13 GMT https://community.cisco.com/t5/wireless/4404-controller-compatibility-with-nexus/m-p/2068263#M148927 hi2himanshu 2021-07-04T05:48:13Z 4404 Controller compatibility with Nexus https://community.cisco.com/t5/wireless/4404-controller-compatibility-with-nexus/m-p/2068264#M148928 <HTML><HEAD></HEAD><BODY><P> HI,</P><P></P><P>I had the same issue before, but it was with 5k switch, you shouldnt plug 4400 LAG with 5k switch, becuase simply the default load balancing algorithim on the 5k is src-dst mac, and if you add the LAG load balancing which is src-dst ip the 5k switch will work on both algo's at the same time.</P><P></P><P>i dont know if the 7k behaves the same way.</P><P></P><P>the workaround for that....is get a 5500 WLC...it has no hardware limitation regarding that.</P></BODY></HTML> Wed, 10 Oct 2012 16:38:46 GMT https://community.cisco.com/t5/wireless/4404-controller-compatibility-with-nexus/m-p/2068264#M148928 Yahya Jaber 2012-10-10T16:38:46Z