topic Password: NCS-to-controller in Wireless

Password: NCS-to-controller

jaysilva6 — Sun, 04 Jul 2021 05:43:46 GMT

Hello,

How do we change the password that was configured intially on the controller to enable communication between NCS and controller itself?

Regards,

Password: NCS-to-controller

Mohammad Abualroos — Thu, 27 Sep 2012 14:15:19 GMT

Hi,

this depends on what is the snmp version you are using.

you have to check the community string configured. if using snmp v2 for example.

please check this part of the cofnig guide:

http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70ccfg.html#wp1117288

please don't forget to mark the question as answered if it helped you.

Cheers,

Mohammad,

Password: NCS-to-controller

jaysilva6 — Fri, 28 Sep 2012 01:03:10 GMT

Hi,

thanks Mohammad. I'm new to Cisco wireless so could be that I'm missing something obvious.

Had a look at the link but it does not mention anything about how to change the "password" that is configured on the the controller which is used when talking to NCS.I think this is a parameter in addtion to the SNMP coummunity strings.

regards,