New to wireless controller 5508

jfrazier — Sun, 04 Jul 2021 03:51:09 GMT

I have all of my access points converted to lightweight except for 4 1242s. They are setup using 5Ghz as a wireless bridge and the 2.4 radio for wireless clients. Do i need to convert to WAP to lightweight, if so how do i setup the access points to use the 5Ghz radio as a bridge.

Thanks in advance.

New to wireless controller 5508

Stephen Rodriguez — Fri, 30 Sep 2011 20:20:01 GMT

You could convert them to CAPWAP and use them as MESH bridges. Here is the link to the indoor MESH guide, so that you can take a look at this as an option.

IMO, if you are using them to link buildings, I might leave them IOS for the time being.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080b1c101.shtml

HTH,
Steve

----------------------------------------------------------------------------------------------------------

Please remember to rate helpful posts or to mark the quesiton as answered so that it can be found later.

topic New to wireless controller 5508 in Wireless

New to wireless controller 5508

New to wireless controller 5508