topic Re: Cisco 2504 Wireless Controller in Wireless

Cisco 2504 Wireless Controller

teymur azimov — Sun, 04 Jul 2021 03:44:19 GMT

Which lightweight access points (LAPs) do the 2504 Series WLCs support ?

Cisco 2504 Wireless Controller

Leo Laohoo — Fri, 09 Sep 2011 04:40:33 GMT

1130, 1040, 1140, 1250, 3500, 1260 as well as the 1230.

Just what are you trying to do?

Cisco 2504 Wireless Controller

teymur azimov — Fri, 09 Sep 2011 07:25:15 GMT

is it possible to connect LAP-1042n to WLC 2504?? Can it be fully managed by WLC 2504?

Thanks in advance...

Cisco 2504 Wireless Controller

rafalw_2 — Sat, 10 Sep 2011 19:43:46 GMT

So with AIR-AP1242AG-A-K9 I am out of luck?

Cisco 2504 Wireless Controller

pcroak — Sat, 10 Sep 2011 21:11:11 GMT

Hello,

No you are not out of luck, the 1240 series is also fully supported with the 2500 WLC (and all current WLC platforms). It looks like Leo forgot that one in his post above.

Now, to address Teymur's question -- you can absolutely connect, manage, and configure 1040 series APs with the 2500 WLC.

-Patrick Croak

Wireless TAC

Cisco 2504 Wireless Controller

George Stefanick — Sun, 11 Sep 2011 20:05:34 GMT

Oh, your part number of your access point ''AIR" is autonmous. You will need to conver that access point to LWAPP/CAPWAP if you want to use it on the WLC. (just and fyi).

Cisco 2504 Wireless Controller

Leo Laohoo — Sun, 11 Sep 2011 22:42:55 GMT

Yes. As Patrick has pointed out, I forgot to put the 1240 in the list. You should be fine.

The 2500 controller uses the 7.0.X firmware so if you read the 7.0.X release notes, you should find a list of APs that are fully supported by this model.

WiSM/WLC Release Notes

Re: Cisco 2504 Wireless Controller

John Malisa — Wed, 12 Feb 2014 02:08:08 GMT

Hi,

I have a Cisco AIR-CAP1602I-Z-K9 access point and trying to join it to a 2504 WLC but cannot. Is this setup possible? From the software release guide Release 7.0.220.0, I cannot see the 1602 AP listed.

Please advice.

Cheers

John

Re: Cisco 2504 Wireless Controller

Scott Fella — Wed, 12 Feb 2014 02:11:33 GMT

The 1602's require v7.4... see the matrix below which you should keep handy.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

Re: Cisco 2504 Wireless Controller

John Malisa — Thu, 13 Feb 2014 08:12:27 GMT

Does anyone at Cisco have an IOS that I can use as this is getting frustrating for the client?

Re: Cisco 2504 Wireless Controller

Sandeep Choudhary — Thu, 13 Feb 2014 08:21:39 GMT

You can ask with your cisco supplier then can provide you the the new software for WLC.

Regards

Re: Cisco 2504 Wireless Controller

John Malisa — Thu, 13 Feb 2014 08:27:18 GMT

thanks.

I'll try