topic Basic configuration for a WLAN Controller - 4400 in Wireless https://community.cisco.com/t5/wireless/basic-configuration-for-a-wlan-controller-4400/m-p/938155#M149547 <P>I've been reading over the "Cisco Wireless LAN Controller Configuration Guide, Release 4.0".</P><P></P><P>So it looks like once you have the HTTPS enabled and the management IP set, the majority of the configuration is through the GUI - clicking your way through all the settings.</P><P></P><P>I've never used a wireless LAN controller -- so to make this quick and easy, is it possible to make a "quick and dirty cut and paste" CLI template to get it up and running with just minimal settings left to be done?</P><P></P><P>If so, could you post it? Thanks.</P> Sat, 03 Jul 2021 23:04:53 GMT jeremyault 2021-07-03T23:04:53Z Basic configuration for a WLAN Controller - 4400 https://community.cisco.com/t5/wireless/basic-configuration-for-a-wlan-controller-4400/m-p/938155#M149547 <P>I've been reading over the "Cisco Wireless LAN Controller Configuration Guide, Release 4.0".</P><P></P><P>So it looks like once you have the HTTPS enabled and the management IP set, the majority of the configuration is through the GUI - clicking your way through all the settings.</P><P></P><P>I've never used a wireless LAN controller -- so to make this quick and easy, is it possible to make a "quick and dirty cut and paste" CLI template to get it up and running with just minimal settings left to be done?</P><P></P><P>If so, could you post it? Thanks.</P> Sat, 03 Jul 2021 23:04:53 GMT https://community.cisco.com/t5/wireless/basic-configuration-for-a-wlan-controller-4400/m-p/938155#M149547 jeremyault 2021-07-03T23:04:53Z Re: Basic configuration for a WLAN Controller - 4400 https://community.cisco.com/t5/wireless/basic-configuration-for-a-wlan-controller-4400/m-p/938156#M149548 <HTML><HEAD></HEAD><BODY><P>Well, first you will have to console into the wlc and go through the startup wizard. that is your minimum configuration to get it working. No way around this unless you build a script to automatically enter information on the startup wizard.</P></BODY></HTML> Wed, 25 Jun 2008 19:47:05 GMT https://community.cisco.com/t5/wireless/basic-configuration-for-a-wlan-controller-4400/m-p/938156#M149548 Scott Fella 2008-06-25T19:47:05Z