topic Re: 4402 controller 4.2.61.0 code what waps work with this in Wireless

4402 controller 4.2.61.0 code what waps work with this

j.boswell — Sat, 03 Jul 2021 22:13:18 GMT

I have a controller on code 4.2.61.0 that was upgraded to this..I have some of the legacy Nortel waps which I believe are now 1000 series cisco that constantly recycle..when waps are operational I see their code level is at 4.0.217.0 not at 4.2.61.0..does this code mean the end of those style of waps..and what waps are acceptable..thanks

Re: 4402 controller 4.2.61.0 code what waps work with this

Rob Huffman — Sat, 19 Jan 2008 17:09:14 GMT

Hi John,

You may have already solved this issue but I thought you may want to see this info that does show full support for the 1000 Series;

Cisco Unified Wireless Network Solution Components

The following components are part of the Cisco UWN Solution and are compatible in this release:

â€¢Software release 4.2.61.0 for all Cisco controllers and lightweight access points

â€¢Cisco autonomous to lightweight mode upgrade tool release 3.0

â€¢Cisco Wireless Control System (WCS) software release 4.2.62.0

â€¢Cisco WCS Navigator 1.1.62.0

â€¢Location appliance software release 3.1.35.0

â€¢Cisco 2700 Series Location Appliances

â€¢Cisco 2000 Series Wireless LAN Controllers

â€¢Cisco 2100 Series Wireless LAN Controllers

â€¢Cisco 4400 Series Wireless LAN Controllers

â€¢Cisco Wireless Services Module (WiSM) for Cisco Catalyst 6500 Series Switches

â€¢Cisco Wireless LAN Controller Network Module for Cisco Integrated Services Routers

â€¢Catalyst 3750G Wireless LAN Controller Switches

â€¢Cisco 3201 Wireless Mobile Interface Card (WMIC)

â€¢Cisco Aironet 1000, 1100, 1130, 1200, 1240, 1250, and 1300 Series Lightweight Access Points

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn4200.html#wp233793

I'm not familiar with the Nortel relationship here, I thought the 1000 series was part of the old "AIRSPACE" (not sure about the spelling 🙂 product line that was aquired by Cisco.

Hope this helps!

Rob

Re: 4402 controller 4.2.61.0 code what waps work with this

j.boswell — Sun, 20 Jan 2008 13:49:09 GMT

Thanks for the info

Re: 4402 controller 4.2.61.0 code what waps work with this

dennischolmes — Mon, 21 Jan 2008 23:19:11 GMT

History 101. Airespace OEM'd APs to Alcatel, Nortel, and NEC for the years prior to the acquisition. These radios, though similar in size and style were not 100% compatible with the Airespace AP1250. They were more in line with the first gen Airespace APs and in some cases are not upgradeable. I haven't personally tried any version of 4x code on these APs. There was a Smartnet conversion plan in place early on. Check with your Cisco AM to see if it is still available.

Re: 4402 controller 4.2.61.0 code what waps work with this

j.boswell — Tue, 22 Jan 2008 11:33:43 GMT

Thanks for the info