topic Wireless Virtual Controller and 2504 - supported APs in Wireless

Wireless Virtual Controller and 2504 - supported APs

Khaled Bamohamed — Sun, 04 Jul 2021 06:18:25 GMT

Hi,

I was working to propose a solution for a small customer where only 10 AP is required. I have selected 1600 Series.

I checked the supported controller but unfortunately, I could not find a confirmation if virtual or 2504 controllers will support these access points.

It will be expensive to propose 5500 Controller.

I would like to know if 1600 AP is supported in Virtual Controller or in 2504 Controller???

Re: Wireless Virtual Controller and 2504 - supported APs

Leo Laohoo — Tue, 08 Jan 2013 04:19:06 GMT

Both controller will support the 1600 as long as the controllers are running 7.4.100.0 firmware.

Software Release Support for Access Points

Re: Wireless Virtual Controller and 2504 - supported APs

Khaled Bamohamed — Tue, 08 Jan 2013 04:27:08 GMT

Thanks alot leolaohoo...

your response is quick and very helpful ...

Wireless Virtual Controller and 2504 - supported APs

Leo Laohoo — Tue, 08 Jan 2013 04:39:07 GMT

Glad to be of some sort of assistance.

Re: Wireless Virtual Controller and 2504 - supported APs

Scott Fella — Tue, 08 Jan 2013 12:59:49 GMT

Just to add to Leo's great response:)

Keep this link handy as it will tell you the compatibility for many if not all of the Cisco Wireless

http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

Sent from Cisco Technical Support iPhone App

Wireless Virtual Controller and 2504 - supported APs

Leo Laohoo — Tue, 08 Jan 2013 22:44:02 GMT

Thanks Scott. Handy link (hope it gets updated regularly).

Wireless Virtual Controller and 2504 - supported APs

Scott Fella — Tue, 08 Jan 2013 22:46:42 GMT

It better or else we will just bug Surendra! hahaha

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"