AP2702 Wireless Settings

ice8k — Mon, 05 Jul 2021 14:54:55 GMT

Hi, I am an absolute beginner with Cisco IOS and really do not know what i am doing. Just a little try & error.

I bought a AP2702 AP and managed to get my VLANs and WLANs up and running. My problem is now that my clients only connect with TxRates from 195 to 234 MBit/s on channel 104 DFS 5 Ghz with 20 MHz bandwidth.

Could anyone please write the commands for 2.4 and 5Ghz radio configuration or has tipps where to look? EU-Settings.

I use this as a standalone AP with the autonomous Software.

Thank You so much.

Re: AP2702 Wireless Settings

Scott Fella — Sat, 25 Nov 2017 17:59:30 GMT

Here is a link that shows you how to co figure 40 MHz channel width.

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap6-radio.html#pgfId-1209277

topic AP2702 Wireless Settings in Wireless

AP2702 Wireless Settings

Re: AP2702 Wireless Settings