topic As per your query ,you have in Wireless

Update the firmware for making the AIR-CAP a standalone wireless system.

it — Mon, 05 Jul 2021 10:50:34 GMT

I need to update the firmware of the Cisco wireless product AIR-CAP3702P-E-K9. I would like to make it as a stand alone wireless device.

Sandeep Choudhary — Wed, 26 Aug 2015 05:32:31 GMT

Hi,

First of all you need an image with "k9w7 – autonomous IOS"

Here are the process to convert:

https://www.youtube.com/watch?v=QQ_NuxdRhQ4

https://supportforums.cisco.com/document/57476/lwapp-autonomous-conversion-and-vice-versa-access-points

https://rscciew.wordpress.com/2014/05/07/access-point-conversion-lap-to-aap-and-vice-versa/

Regards

Don't forget to rate helpful posts

mohanak — Wed, 26 Aug 2015 12:53:04 GMT

Moin Ilyas — Thu, 27 Aug 2015 15:02:28 GMT

gohussai — Thu, 27 Aug 2015 16:54:35 GMT

As per your query ,you have AP in LAP mode. Just change the Firmware to make it behave as Autonomous [Stand ALone].

For AP to behave as Autonomous ,you need firmware with k9w7 (IOS) at the end of the firmware name.

Note:- You can also manage it centrally after conversion using WCS/PI.