topic Re: 2602E wireless bridge in Wireless

2602E wireless bridge

kumaran pathmanathan — Sun, 04 Jul 2021 08:07:57 GMT

Hi Guys,

I will need to configure IOS (standalone) 2602E as access point as wireless bridge. When I try to disable 3 out of 4 antenna ports (only enable A) for wireless birding it won’t save I get white screen but if make changes on rest the setting I have no issues. Anyone know why is that happening? I can make any changes expect disabling the antenna ports?

Thanks

Kumaran

Re: 2602E wireless bridge

Sandeep Choudhary — Tue, 22 Oct 2013 16:02:25 GMT

Hi Kumaran,

Follow this post:

https://supportforums.cisco.com/thread/2244263

More.......................

About your issue, you better go for Aironet IOS configuratoin guide. It is the config guide for autonomouse mode.

Check this config guide for example:

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b.html

Check the config examples right here:

http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_configuration_examples_list.html

Hope this helps.

Regards

Re: 2602E wireless bridge

Scott Fella — Tue, 22 Oct 2013 17:00:20 GMT

Just to add. Here is a good basic easy to follow guide for bridging.

https://supportforums.cisco.com/docs/DOC-16087

You also need to be comfortable in making changes using the CLI and not the GUI. v12.4 is more stable when using the GUI than v15.x.

Sent from Cisco Technical Support iPhone App

Re: 2602E wireless bridge

Abhishek Abhishek — Tue, 22 Oct 2013 20:38:39 GMT

Please refer to the link---

http://www.cisco.com/en/US/docs/wireless/access_point/2600/quick/guide/ap2600getstart.pdf