topic dhcp through wireless in Wireless https://community.cisco.com/t5/wireless/dhcp-through-wireless/m-p/2218982#M152528 <HTML><HEAD></HEAD><BODY><P>Please log on to the CLI of the WLC and run the command;</P><P></P><P><STRONG>Debug Client [MAC Address of Scanner]</STRONG></P><P></P><P>Once you have that running, try to get the scanner to associate with the SSID for a couple of minutes.&nbsp; Please post the resulting output here and somebody will be able to let you know what's happening.</P><P></P><P>Richard</P></BODY></HTML> Thu, 06 Jun 2013 06:29:59 GMT Richard Atkin 2013-06-06T06:29:59Z dhcp through wireless https://community.cisco.com/t5/wireless/dhcp-through-wireless/m-p/2218981#M152527 <P>Hi,</P><P></P><P>I have a simple query about wireless.</P><P>We have a handheld thermal imager with wireless capability. But when it tries to associate to ssid , it doesn't seem to get an IP address through dhcp.</P><P></P><P>However, in place if i use my laptop to connect to wireless, i can get a dhcp ip address from the same wireless network/ssid.</P><P></P><P>Why is it so? thermal imager only supports 802.11b/g standard.</P><P></P><P>Appreciate all inputs.</P> Sun, 04 Jul 2021 07:11:16 GMT https://community.cisco.com/t5/wireless/dhcp-through-wireless/m-p/2218981#M152527 suthomas1 2021-07-04T07:11:16Z dhcp through wireless https://community.cisco.com/t5/wireless/dhcp-through-wireless/m-p/2218982#M152528 <HTML><HEAD></HEAD><BODY><P>Please log on to the CLI of the WLC and run the command;</P><P></P><P><STRONG>Debug Client [MAC Address of Scanner]</STRONG></P><P></P><P>Once you have that running, try to get the scanner to associate with the SSID for a couple of minutes.&nbsp; Please post the resulting output here and somebody will be able to let you know what's happening.</P><P></P><P>Richard</P></BODY></HTML> Thu, 06 Jun 2013 06:29:59 GMT https://community.cisco.com/t5/wireless/dhcp-through-wireless/m-p/2218982#M152528 Richard Atkin 2013-06-06T06:29:59Z