topic recommendations for wireless bridge in Wireless https://community.cisco.com/t5/wireless/recommendations-for-wireless-bridge/m-p/2103119#M152741 <HTML><HEAD></HEAD><BODY><P>what do you mean 'you can't roam'?&nbsp; if you mean between the IOS SSID and the WLC SSID, that is true, but if you bridge the link, you can put an LAP on that side adn then you could roam.</P><P></P><P></P><P>HTH, <BR />Steve <BR /> <BR />------------------------------------------------------------------------------------------------ <BR />Please remember to rate useful posts, and mark questions as answered</P></BODY></HTML> Tue, 27 Nov 2012 20:37:08 GMT Stephen Rodriguez 2012-11-27T20:37:08Z recommendations for wireless bridge https://community.cisco.com/t5/wireless/recommendations-for-wireless-bridge/m-p/2103116#M152738 <P>I have several 1262 LAP's connected to a virtual WLC controller. I need to build a wireless bridge to a warehouse for a few computers and voip phones. Any recomendations on the hardware and configeration? I've done this before with Proxim AP's, but am new to Cisco's wireless hardware. Duel radio's would help, so I can put one inside and one outside for the bridge.</P> Sun, 04 Jul 2021 06:07:19 GMT https://community.cisco.com/t5/wireless/recommendations-for-wireless-bridge/m-p/2103116#M152738 neilrmessick 2021-07-04T06:07:19Z recommendations for wireless bridge https://community.cisco.com/t5/wireless/recommendations-for-wireless-bridge/m-p/2103117#M152739 <HTML><HEAD></HEAD><BODY><P>you could use two 1262 in IOS mode.&nbsp; How far of a shot is the bridge going to be?</P><P></P><P></P><P></P><P></P><P>HTH, <BR />Steve <BR /> <BR />------------------------------------------------------------------------------------------------ <BR />Please remember to rate useful posts, and mark questions as answered</P></BODY></HTML> Tue, 27 Nov 2012 20:10:13 GMT https://community.cisco.com/t5/wireless/recommendations-for-wireless-bridge/m-p/2103117#M152739 Stephen Rodriguez 2012-11-27T20:10:13Z recommendations for wireless bridge https://community.cisco.com/t5/wireless/recommendations-for-wireless-bridge/m-p/2103118#M152740 <HTML><HEAD></HEAD><BODY><P>its 100 yards, I'd rather not use iOS mode because I can't roam.</P></BODY></HTML> Tue, 27 Nov 2012 20:31:13 GMT https://community.cisco.com/t5/wireless/recommendations-for-wireless-bridge/m-p/2103118#M152740 neilrmessick 2012-11-27T20:31:13Z recommendations for wireless bridge https://community.cisco.com/t5/wireless/recommendations-for-wireless-bridge/m-p/2103119#M152741 <HTML><HEAD></HEAD><BODY><P>what do you mean 'you can't roam'?&nbsp; if you mean between the IOS SSID and the WLC SSID, that is true, but if you bridge the link, you can put an LAP on that side adn then you could roam.</P><P></P><P></P><P>HTH, <BR />Steve <BR /> <BR />------------------------------------------------------------------------------------------------ <BR />Please remember to rate useful posts, and mark questions as answered</P></BODY></HTML> Tue, 27 Nov 2012 20:37:08 GMT https://community.cisco.com/t5/wireless/recommendations-for-wireless-bridge/m-p/2103119#M152741 Stephen Rodriguez 2012-11-27T20:37:08Z recommendations for wireless bridge https://community.cisco.com/t5/wireless/recommendations-for-wireless-bridge/m-p/2103120#M152742 <HTML><HEAD></HEAD><BODY><P>kinda sucky... I was hoping the WLC could manage all the AP's so I would not have to do that. </P><P></P><P>The current setup with Proxim hardware allows clients to also use the bridge radio's, it does not have to be dedicated to the bridge.</P></BODY></HTML> Tue, 27 Nov 2012 20:40:00 GMT https://community.cisco.com/t5/wireless/recommendations-for-wireless-bridge/m-p/2103120#M152742 neilrmessick 2012-11-27T20:40:00Z recommendations for wireless bridge https://community.cisco.com/t5/wireless/recommendations-for-wireless-bridge/m-p/2103121#M152743 <HTML><HEAD></HEAD><BODY><P>The WLC won't be able to control a 'bridge', unless you were using 1552.&nbsp; </P><P></P><P>But you could use the radios on the bridge as well, so long as you use 'infrastrucure-ssid optional' under the SSID.&nbsp; that will allow you to 'bridge' on teh 5GHz and still use the 2.4GHz</P><P></P><P></P><P>HTH, <BR />Steve <BR /> <BR />------------------------------------------------------------------------------------------------ <BR />Please remember to rate useful posts, and mark questions as answered</P></BODY></HTML> Tue, 27 Nov 2012 20:43:06 GMT https://community.cisco.com/t5/wireless/recommendations-for-wireless-bridge/m-p/2103121#M152743 Stephen Rodriguez 2012-11-27T20:43:06Z