topic Limited error connectivity message on Wireless in Wireless

Limited error connectivity message on Wireless

akash04lingam — Sun, 04 Jul 2021 03:03:58 GMT

Hi,

While connecting users to wireless connection getting Limited error connectivity message by using AP1142N with H-Reap solution. The user is able to connect without any problem with other buidling AP with same solution.Please let me know....what could be the problem ?

Thanks

Re: Limited error connectivity message on Wireless

Nicolas Darchis — Tue, 12 Apr 2011 11:44:36 GMT

That means the clients did not receive an ip address or a proper gateway. I would suggest you check that and check your DHCP configuration.

HREAP requires a DHCP server to be present on the site where the HREAP AP is.

Re: Limited error connectivity message on Wireless

akash04lingam — Tue, 12 Apr 2011 12:45:50 GMT

Thanks, you are correct but two more AP's connected to same switch & controller with same solution, there is no problem...it is only problem with one AP....I have applied the templates again & tested but same problem appeared.. Even switch port also changed.

Re: Limited error connectivity message on Wireless

Nicolas Darchis — Tue, 12 Apr 2011 12:48:26 GMT

Check the vlan mappings on that AP maybe ?