topic Re: wireless module different IP addresses in Wireless

wireless module different IP addresses

pcfreak49 — Sun, 04 Jul 2021 02:35:29 GMT

hello I have a problem with my wireless router, cisco wireless module allows you to give different IP addresses so that IP addresses are different who can help me please

Re: wireless module different IP addresses

Surendra BG — Fri, 24 Dec 2010 12:07:14 GMT

Hi,

your question is not clear for me.. do u want your wireless module to lease out IP addresses and do u need the config help on that??

Regards

Surendra

Re: wireless module different IP addresses

pcfreak49 — Fri, 24 Dec 2010 12:14:39 GMT

I mean yes the

Re: wireless module different IP addresses

Surendra BG — Fri, 24 Dec 2010 12:25:49 GMT

Ok... whats the device do we have?? whats the router and whats the AP??

Here is the link which may help you..

http://www.cisco.com/en/US/docs/wireless/access_point/12.3_7_JA/configuration/guide/s37adm.html#wp1090319

lemme know if this answered your question..

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

Re: wireless module different IP addresses

pcfreak49 — Fri, 24 Dec 2010 12:30:56 GMT

ok thanks but I've tried everything but always get the ip address of the wired network?

Re: wireless module different IP addresses

Surendra BG — Fri, 24 Dec 2010 12:34:38 GMT

it will be great if you could provide me the info regarding where is the DHCP currently configured and whats the device and running config from the same.. so that i will get the clear picture to help you out...

Regards

Surendra

Re: wireless module different IP addresses

pcfreak49 — Fri, 24 Dec 2010 13:07:49 GMT

okay this is running-config of wireless module

Re: wireless module different IP addresses

Surendra BG — Fri, 24 Dec 2010 13:13:50 GMT

BVI interface , VLAN 1 and the DHCP pool on the same subnet??

remove the command "bridge 2 protocol ieee" and issue "bridge 1 protocol ieee"

Regads

Surendra

Re: wireless module different IP addresses

pcfreak49 — Fri, 24 Dec 2010 13:22:59 GMT

so I removed it

but still get the same network

Re: wireless module different IP addresses

Surendra BG — Fri, 24 Dec 2010 13:25:36 GMT

BVI interface , VLAN 1 and the DHCP pool which is configured on the same subnet?? on 20.10.10.0 255.255.255.248 network?? i dont see the BVI interface ip in the config..

Regards

Surendra

Re: wireless module different IP addresses

pcfreak49 — Fri, 24 Dec 2010 13:30:27 GMT

you mean so

Re: wireless module different IP addresses

Surendra BG — Fri, 24 Dec 2010 13:39:31 GMT

ok.. the default route on the DHCP pool should be the ip of the BVI.. please configure the same and lemme know how this helps..

ip dhcp pool R2.ap-pool
   import all
   network 20.10.10.0 255.255.255.248
   domain-name shrun
   default-router 20.10.10.2

and ip for the BVI make sure the mask is configured..

Regards

Surendra

Re: wireless module different IP addresses

pcfreak49 — Fri, 24 Dec 2010 13:45:29 GMT

you mean .. that I configured in the other running-config to put that right?

Re: wireless module different IP addresses

Surendra BG — Fri, 24 Dec 2010 13:51:13 GMT

Hi,

I hope the below config is on the AP..

ip dhcp pool R2.ap-pool
   import all
   network 20.10.10.0 255.255.255.248
   domain-name shrun
   default-router 20.10.10.1

So we just need to change the default router to 20.10.10.2 instead 20.10.10.1, and then try connecting a client and update me..

so it should be like..

int bvi on the AP should have the ip addr 20.10.10.2 255.255.255.248 and the int vlan on the Router should be 20.10.10.1 255.255.255.248 and then under the DHCP pool config on the AP make sure the default router points to BVI int IP..

Regards

Surendra

Re: wireless module different IP addresses

Surendra BG — Fri, 24 Dec 2010 14:07:52 GMT

did that work??

lemme know if this answered your question..

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

Re: wireless module different IP addresses

pcfreak49 — Fri, 24 Dec 2010 14:14:41 GMT

you mean so

the int vlan needs in the AP?

Re: wireless module different IP addresses

Surendra BG — Fri, 24 Dec 2010 14:23:11 GMT

int vlan should be on the Router not on the AP..

that is..

on the router

===========

int vlan 1

ip addr 20.10.10.1 255.255.255.248

no shut

end

On the AP

==========

int bvi 1

ip addr 20.10.10.2 255.255.255.248

no shut

end

ip dhcp pool R2.ap-pool
   import all
   network 20.10.10.0 255.255.255.248
   domain-name home.be
   default-router 20.10.10.2

The above will do!!

lemme know if this answered your question..

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

Re: wireless module different IP addresses

Surendra BG — Fri, 24 Dec 2010 14:31:41 GMT

did that work??

lemme know if this answered your question..

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

Re: wireless module different IP addresses

Surendra BG — Fri, 24 Dec 2010 15:02:37 GMT

lemme know if ur facing some issues with internal DHCP

Regards
Surendra
====
Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

Re: wireless module different IP addresses

pcfreak49 — Fri, 24 Dec 2010 15:12:08 GMT

so these are the two running-config of the router and AP

hope it's true