topic Re: Wireless Workgroup Bridge in Wireless

Wireless Workgroup Bridge

angelcool — Sun, 04 Jul 2021 01:39:43 GMT

Hello community,

I want to use my Aironet 1220 as a bridge, so I will connect my Aironet to an existing WLAN as a client and then connect my Aironet to a switch and hook up hosts in the switch, the hosts then will be connected to the LAN through the Aironet and the existing AP.

I mean something like this:

If this is model does not support this, What Cisco model can handle this type of configuration?

Any suggestions ?

Your time is greatly appreciated.

Thank you.
Angel Cool

Re: Wireless Workgroup Bridge

Leo Laohoo — Thu, 25 Mar 2010 03:50:23 GMT

Wireless Bridges Point-to-Point Link Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml

Please don't forget to rate my post. Thanks.

Re: Wireless Workgroup Bridge

Scott Fella — Fri, 26 Mar 2010 03:49:42 GMT

Here is a link to configure your 1220 as a WGB

http://cisco.com/en/US/products/hw/wireless/ps430/products_configuration_example09186a00805b9b87.shtml