topic Re: WIRELESS VLAN in Wireless

WIRELESS VLAN

ricardo-morales — Sat, 03 Jul 2021 20:17:23 GMT

i was traying to configure a 1300 AIRONET with two VLAN with autentication but i cant, can sme one suggest a configuratio.

Re: WIRELESS VLAN

sushilk — Mon, 27 Nov 2006 04:47:20 GMT

Hope this link helps - http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665ceb.shtml

Re: WIRELESS VLAN

adisegna713 — Tue, 05 Dec 2006 02:20:19 GMT

Hi, I have a question about this document.

If you have two access points both with two VLANs (secure and not so secure) each how would you configure the other switch port? Each switch port would need to be configured as a trunk, correct?

Thanks

Re: WIRELESS VLAN

jasonkwang — Tue, 05 Dec 2006 07:21:42 GMT

Hi All,

Yes, the switch port that connect to the wireless AP need to be configured as trunk.

eg. int fa0/1

switchport trunk encapsulation dot1q

switchport trunk

switchport nonegotiate

switchport trunk allowed vlan A, B

Each vlan can support different encryption for wireless lan.

The only problem I face is whenever there is a fail link on the switch, the port that connect to the AP will transit trough Blocking, learning, etc which total to 18 tomeouts. This is unacceptable. Any solution for these ?

Re: WIRELESS VLAN

adisegna713 — Wed, 06 Dec 2006 17:57:02 GMT

How would you configure the switch ports to accept traffic for the multiple VLANs on each access point connected to the same switch?

Thanks

Re: WIRELESS VLAN

ricardo-morales — Wed, 06 Dec 2006 21:19:48 GMT

yes thanks..