topic Re: interface Virtual Dot11Radio0, changed state to down in Wireless https://community.cisco.com/t5/wireless/interface-virtual-dot11radio0-changed-state-to-down/m-p/585549#M154694 <HTML><HEAD></HEAD><BODY><P>The Virtual-Dot11Radio interface is used to indicate whether or not there are any clients associated to a given access point or radio within that access point, When clients are associated, the Virtual-Dot11Radio interface is up; when there are no clients associated, it shows down. </P></BODY></HTML> Fri, 30 Jun 2006 17:23:42 GMT a-vazquez 2006-06-30T17:23:42Z interface Virtual Dot11Radio0, changed state to down https://community.cisco.com/t5/wireless/interface-virtual-dot11radio0-changed-state-to-down/m-p/585548#M154692 <P>Interface Virtual Dot11Radio0,changed state to down then up every few minutes. This happens several times sometimes on more than one AP cisco AIR-AP1231G-A-K9 with 12.2 (8) JA. Rebooting seems to fix it temporarily. </P> Sun, 04 Jul 2021 19:29:59 GMT https://community.cisco.com/t5/wireless/interface-virtual-dot11radio0-changed-state-to-down/m-p/585548#M154692 jvancleve1 2021-07-04T19:29:59Z Re: interface Virtual Dot11Radio0, changed state to down https://community.cisco.com/t5/wireless/interface-virtual-dot11radio0-changed-state-to-down/m-p/585549#M154694 <HTML><HEAD></HEAD><BODY><P>The Virtual-Dot11Radio interface is used to indicate whether or not there are any clients associated to a given access point or radio within that access point, When clients are associated, the Virtual-Dot11Radio interface is up; when there are no clients associated, it shows down. </P></BODY></HTML> Fri, 30 Jun 2006 17:23:42 GMT https://community.cisco.com/t5/wireless/interface-virtual-dot11radio0-changed-state-to-down/m-p/585549#M154694 a-vazquez 2006-06-30T17:23:42Z