AP 1140 - Multiple SSID

mplaksin0 — Sun, 04 Jul 2021 03:35:30 GMT

Hello,

Anyone have an example of a configuration where i have a Cisco 1140 connected with a trunk to one router and with the Cisco 1140 i broadcast one SSID per vlan, one with WPA2 and other "open".?.

I ask because i see that when i turn on cipher, i cant configure an SSID without encryption and other with

Thanks

Re: AP 1140 - Multiple SSID

Stephen Rodriguez — Wed, 17 Aug 2011 21:03:00 GMT

Multiple SSID w/VLAN

ssid Internal

vlan 10

auth open

auth key wpa ver 2

wpa ascii 12345678

ssid Guest

vlan 20

auth open

guest-mode

int dot11radio0

encryption vlan 10 mode ciphers aes-ccm

Int dot0.10

encapsulation dot1q 10 (native if this is hte mgmt vlan)

bridge-group 10 (will be set as 1 if native)

int dot.20

encapsulation dot1q 20

bridge-group 20

If you needed to broadcast both :

dot11 mbssid

ssid Internal

mbssid guest-mode

Int dot11radio0

mbssid

HTH,

Steve

topic AP 1140 - Multiple SSID in Wireless

AP 1140 - Multiple SSID

Re: AP 1140 - Multiple SSID