topic Re: Monitoring Wireless Bridges in Wireless https://community.cisco.com/t5/wireless/monitoring-wireless-bridges/m-p/230717#M154991 <HTML><HEAD></HEAD><BODY><P>Thank you.</P></BODY></HTML> Wed, 14 Jul 2004 02:39:26 GMT paul.schmidt 2004-07-14T02:39:26Z Monitoring Wireless Bridges https://community.cisco.com/t5/wireless/monitoring-wireless-bridges/m-p/230715#M154989 <P>We are trying to setup redundant links between 4 sites. We need to remotely monitor each wireless link and have our switches automatically detect outages on the wireless side. Is there a way to have the wireless 350 drop the ethernet port when the wireless link fails? Due to cost constraints we need to work at layer 2.</P> Sun, 04 Jul 2021 16:47:33 GMT https://community.cisco.com/t5/wireless/monitoring-wireless-bridges/m-p/230715#M154989 paul.schmidt 2021-07-04T16:47:33Z Re: Monitoring Wireless Bridges https://community.cisco.com/t5/wireless/monitoring-wireless-bridges/m-p/230716#M154990 <HTML><HEAD></HEAD><BODY><P>You can configure Loss of Backbone Connectivity.</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_guide_chapter09186a008007f77f.html#1025134" target="_blank">http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_guide_chapter09186a008007f77f.html#1025134</A></P></BODY></HTML> Mon, 12 Jul 2004 12:40:36 GMT https://community.cisco.com/t5/wireless/monitoring-wireless-bridges/m-p/230716#M154990 kmarrero 2004-07-12T12:40:36Z Re: Monitoring Wireless Bridges https://community.cisco.com/t5/wireless/monitoring-wireless-bridges/m-p/230717#M154991 <HTML><HEAD></HEAD><BODY><P>Thank you.</P></BODY></HTML> Wed, 14 Jul 2004 02:39:26 GMT https://community.cisco.com/t5/wireless/monitoring-wireless-bridges/m-p/230717#M154991 paul.schmidt 2004-07-14T02:39:26Z