topic Re: LWAPP ios image in Wireless

LWAPP ios image

vishalpatil86 — Sun, 04 Jul 2021 02:59:02 GMT

hi,

which one is LWAPP ios image for cisco 1242AG series AP?

c1240-k9w7-tar.124-10b.JA.tar

c1240-k9w7-tar.124-10b.JA3.tar

c1240-k9w7-tar.124-25d.JA.tar

Re: LWAPP ios image

Surendra BG — Tue, 22 Mar 2011 12:23:03 GMT

Hi,

None of them are LWAPP images.. All of them are IOS images..

LWAPP image will be having K9W8 in the image..

lemme know if this naswered your question!!

Regards

Surendra

Re: LWAPP ios image

Surendra BG — Tue, 22 Mar 2011 12:26:02 GMT

Hi,

Here is the link which gives you list of LWAPP images

http://www.cisco.com/cisco/software/release.html?mdfid=280237322&flowid=7588&softwareid=280775090&release=12.4%2821a%29JA2&relind=AVAILABLE&rellifecycle=&reltype=latest

LWAPP image looks like this..

c1240-rcvk9w8-tar.124-21a.JA2.tar

c1240-rcvk9w8-tar.124-10b.JDA.tar

Lemme know if this answered your question!!

Regards

Surendra

Re: LWAPP ios image

vishalpatil86 — Tue, 22 Mar 2011 13:15:43 GMT

hi,

is this lwapp image?

c1240-rcvk9w8-tar.123-11JX1.tar

Re: LWAPP ios image

Surendra BG — Tue, 22 Mar 2011 13:17:48 GMT

Yes it is

Regards

Surendra

Re: LWAPP ios image

vishalpatil86 — Wed, 23 Mar 2011 04:43:45 GMT

how can i install it to an AP having autonomous image alreasy?

Re: LWAPP ios image

dmantill — Wed, 23 Mar 2011 04:47:39 GMT

via TFTP with the archive download command

Re: LWAPP ios image

Surendra BG — Wed, 23 Mar 2011 04:48:11 GMT

Hi,

Please use the below link and this will let us know the procedure to convert the LWAPP to Autonomous or Autonomous to LWAPP..

https://supportforums.cisco.com/docs/DOC-14960

Lemme know if this answered your question!!

Regards

Surendra

Re: LWAPP ios image

vishalpatil86 — Wed, 23 Mar 2011 04:48:23 GMT

can u pls tell me the steps?

Re: LWAPP ios image

Surendra BG — Wed, 23 Mar 2011 04:54:50 GMT

Hi,

Here is the link which you can use..

https://supportforums.cisco.com/docs/DOC-14960

Regards

Surendra

Re: LWAPP ios image

vishalpatil86 — Wed, 23 Mar 2011 05:24:56 GMT

hi,

successfully loaded the lwapp. thank u.

but it is not showing the signal.

also not showing dot11radio.

help me on this

Re: LWAPP ios image

Surendra BG — Wed, 23 Mar 2011 05:27:54 GMT

This is expected.. when this gets registered ti the WLC then you will be able to get the signal based on the WLC config!!

Lemme know if this answered your question!!

Regards

Surendra

Re: LWAPP ios image

vishalpatil86 — Wed, 23 Mar 2011 05:33:16 GMT

it is registered with wlc,

it has taken the config of previously configured autinomous mode like IP and default gateway.

Re: LWAPP ios image

Surendra BG — Wed, 23 Mar 2011 05:35:27 GMT

on the AP console.. issue the command "show capwap client rcb" or "show lwapp client rcb" and paste it here..

Regards

Surendra

Re: LWAPP ios image

vishalpatil86 — Wed, 23 Mar 2011 06:26:25 GMT

ap03#show lwapp client rcb

AdminState                  : ADMIN_ENABLED
SwVer                       : 3.0.51.0
NumFilledSlots              : 0
Name                        : GUEST_9TH_03
Location                    : default location
MwarName                    :
MwarMacAddr                 : ffff.ffff.2fbf
MwarHwVer                   : 0.0.0.0
ApMode                      : Local
OperationState              : DISCOVERY

Re: LWAPP ios image

Surendra BG — Wed, 23 Mar 2011 06:29:46 GMT

The AP is not registered yet!!

The AP is in Discovery Mode..

OperationState : DISCOVERY

Regards

Surendra

Re: LWAPP ios image

vishalpatil86 — Wed, 23 Mar 2011 06:36:11 GMT

how can i register it to wlc?

Re: LWAPP ios image

Surendra BG — Wed, 23 Mar 2011 06:40:34 GMT

Hi,

Please use the below link and this will give you the detailed explanation on getting the AP registered to WLC..

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml

here is the Troubleshooting guide as well..

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml

Lemme know if this helps..

Regards

Surendra