topic Re: AIR-LAP1252AG-A-K9 RED LIGHTS in Wireless

AIR-LAP1252AG-A-K9 RED LIGHTS

mdrangell22 — Mon, 05 Jul 2021 16:29:32 GMT

Hello

I have a issue with 2 AIR-LAP1252AG-A-K9, when I connect them to my network all the lights of Ethernet, Radio and Status turn on in red color and thry don't change, what could be happened? I have others AIR-LAP1252AG-A-K9 and works fine.

I tried CLI these 2 ap but nothing happen on screen.

Re: AIR-LAP1252AG-A-K9 RED LIGHTS

Seb Rupik — Thu, 22 Nov 2018 16:21:50 GMT

Hi there,

According to the hardware guide:

Red

DRAM memory test failure.

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1250/installation/guide/1250HIG_TD-Book-Wrapper/125h_c3.html#wp1077466

Cheers,

Seb.

Re: AIR-LAP1252AG-A-K9 RED LIGHTS

Rasika Nayanajith — Fri, 23 Nov 2018 05:16:53 GMT

You can try holding reset button for 20+ seconds when powering it. Still not difference, I would think it needs RMAed

HTH

Rasika

*** Pls rate all useful responses ***

Re: AIR-LAP1252AG-A-K9 RED LIGHTS

Leo Laohoo — Fri, 23 Nov 2018 07:41:15 GMT

If all LED are red, then it's dead.

Re: AIR-LAP1252AG-A-K9 RED LIGHTS

mdrangell22 — Mon, 10 Dec 2018 20:44:42 GMT

Yes you were right .