topic I can't configure air-cap702w-n-k9 in Wireless

I can't configure air-cap702w-n-k9

rene.cortes — Mon, 05 Jul 2021 12:34:48 GMT

Daniel Ordóñez Flores — Sun, 07 Aug 2016 18:37:34 GMT

Hi Rene.

You need to use the command debug capwap console cli

Now what do you want to do? It's possible that you ap is in lightweight mode and you need a WLC to configure it.

Other posibility is convert your Ap to autonomus mode. How con you know what version the AP has? Well... You need to write show version.

Rasika Nayanajith — Mon, 08 Aug 2016 03:57:44 GMT

Do you have a WLC to manage this AP ? You need a WLC to manage this AP.

Refer below deployment guide for more details

HTH

Rasika

*** Pls rate all useful responses ***

rene.cortes — Mon, 08 Aug 2016 18:23:27 GMT

thank you bro!

i also needed to write "lwapp ap " before any command. For instance:

ap#lwapp ap ip address 45.45.45.3 255.255.255.0

and is also neccesary put the WLC ip address.

ap>#lwapp ap controller ip address 45.45.45.54

see you, best regards!