topic thanks for you reply. I in Wireless

CISCO air-cap1702i-d-k9 CONFIGURATION

sanilramachandran — Mon, 05 Jul 2021 12:18:06 GMT

I am trying to configure air-cap1702i-d-k9 in autonomous mode. I have connected the AP via console and established communication but i am unable to connect the AP using web. I have assigned capwap ip and default gate way via cli. can any one help me to fix this?

You you executed the command

Philip D'Ath — Sat, 25 Jun 2016 04:19:13 GMT

You you executed the command "capwap ap autonomous" ?

no i didnt. But do i need to

sanilramachandran — Sat, 25 Jun 2016 04:38:37 GMT

no i didnt. But do i need to execute this cmd for accessing the AP from browser?

You have to run that command

Philip D'Ath — Sat, 25 Jun 2016 04:39:34 GMT

You have to run that command to put the access point into autonomous mode.

thanks for you reply. I

sanilramachandran — Sat, 25 Jun 2016 04:41:30 GMT

thanks for you reply. I understand what you are suggesting.

Could you pls tell me if there is any procedure to follow to access the AP from web browser?

If you have autonomous image,

mohanak — Thu, 07 Jul 2016 03:46:11 GMT

If you have autonomous image, refer the document : http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap4-first.html#96723

Thanks for this command, i am

bhanu2020 — Mon, 12 Sep 2016 18:38:47 GMT

Thanks for this command, i am trying from hours to make AP standalone.