topic Every thing got done, same in Wireless

Cisco Air-CAP1602I-A-K9 first configuration help

rameshkrishnan — Mon, 05 Jul 2021 09:53:07 GMT

Hi,

Need help in configuring Cisco Aironet Air-CAP1602I-A-K9 , i have got the IP address of the interface, it cannot access from the web browser.

not even , i cant enter to the global configuration mode in CLI. use all commants like "Configure", "Configure terminal"

The product ID prefix of "CAP

Leo Laohoo — Thu, 09 Apr 2015 12:37:15 GMT

The product ID prefix of "CAP" stands for "controller-based AP". If you need to use this AP like an autonomous AP then you'll need to convert the AP from running controller-based IOS to autonomous IOS.

Follow the controller based (

Saurav Lodh — Thu, 09 Apr 2015 13:02:23 GMT

Follow the controller based ( lightweight ) Ap to Autonomous AP conversion from

https://learningnetwork.cisco.com/thread/14405

Once converted to Autonomous

Moin Ilyas — Thu, 09 Apr 2015 13:20:19 GMT

Once converted to Autonomous Image, please refer to the following links:

www.cisco.com/c/en/us/td/docs/wireless/access_point/1600/quick/guide/ap1600getstart.html

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3.html

Hope that helps.

I tried to convert the same

rameshkrishnan — Fri, 10 Apr 2015 06:26:48 GMT

I tried to convert the same using mode button, Tftp is not taking the image. not working any archive commands. please help to resolve

Hi Ramesh,You AP has which

Sandeep Choudhary — Fri, 10 Apr 2015 06:36:04 GMT

Hi Ramesh,

You AP has which image(Lightweight or standalone) ?

paste the output of this: sh version

Regards

Don't forget to rate helpful posts

Hi Sandeep, thanks for your

rameshkrishnan — Fri, 10 Apr 2015 07:00:33 GMT

Hi Sandeep, thanks for your responce.

please find the following show version

AP24e9.b34b.e72d#show version
Cisco IOS Software, C1600 Software (AP1G2-RCVK9W8-M), Version 15.2(4)JA1, RELEAS
E SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 30-Jul-13 23:41 by prod_rel_team

ROM: Bootstrap program is C1600 boot loader
BOOTLDR: C1600 Boot Loader (AP1G2-BOOT-M) LoaderVersion 15.2(2)JAX, RELEASE SOFT
WARE (fc1)

AP24e9.b34b.e72d uptime is 9 minutes
System returned to ROM by power-on
System image file is "flash:/ap1g2-rcvk9w8-mx/ap1g2-rcvk9w8-mx"
Last reload reason:

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-CAP1602I-A-K9 (PowerPC) processor (revision B0) with 98294K/32768K byt
es of memory.
Processor board ID FGL1752S3TE
PowerPC CPU at 533Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 7.5.1.73
1 Gigabit Ethernet interface

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 24:E9:B3:4B:E7:2D
Part Number : 73-14671-04
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : FOC17466QYL
Top Assembly Part Number : 800-38552-01
Top Assembly Serial Number : FGL1752S3TE
Top Revision Number : A0
Product/Model Number : AIR-CAP1602I-A-K9

Configuration register is 0xF

I am Getting the following

rameshkrishnan — Fri, 10 Apr 2015 07:33:32 GMT

I am Getting the following error.while changing the IOS to Autonomous.

process_config_recovery: image recovery
image_recovery: Download default IOS tar image tftp://255.255.255.255/ap1g2-k9w7
-tar.default

examining image...Tar checksum error in fd 0

ERROR: Failed to extract from archive file tftp://255.255.255.255/ap1g2-k9w7-tar
.default

Please help

Hi Ramesh,

Sandeep Choudhary — Fri, 10 Apr 2015 07:53:56 GMT

Hi Ramesh,

Did you tried this method:

archive download-sw /force-reload /overwrite tftp://10.0.0.1/ c1240-k9w7-mx.124-25d.JA2.tar

https://rscciew.wordpress.com/2014/05/07/access-point-conversion-lap-to-aap-and-vice-versa/

Try this instead of Mode button.

Regards

Don't forget to rate helpful posts

Alresdy Tried the same

rameshkrishnan — Fri, 10 Apr 2015 08:28:28 GMT

Alresdy Tried the same command is not working

Hi Ramesh,1. Did you put the

Sandeep Choudhary — Fri, 10 Apr 2015 08:34:29 GMT

Hi Ramesh,

1. Did you put the computer and AP in same subnet ?

2. Can you ping the AP IP from your laptop ?

what is the output of: sh ip int brief

Regards

Don't forget to rate helpful posts

Show ip int brief commant is

rameshkrishnan — Fri, 10 Apr 2015 10:12:35 GMT

Show ip int brief commant is not working but the BVI 1 interface assigned an ip as 10.0.0.3

earlier it was pinging to my pc IP 10.0.0.4

Now its not. showing error no protocol is running

AP24e9.b34b.e72d#show ip

rameshkrishnan — Fri, 10 Apr 2015 10:15:39 GMT

AP24e9.b34b.e72d#show ip interface bv
AP24e9.b34b.e72d#show ip interface bvI1
BVI1 is up, line protocol is up
Internet address will be negotiated using DHCP
Broadcast address is 255.255.255.255
MTU is 1500 bytes
Helper address is not set
Directed broadcast forwarding is disabled
Outgoing access list is not set
Inbound access list is not set
Proxy ARP is enabled
Local Proxy ARP is disabled
Security level is default
Split horizon is enabled
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is enabled
IP fast switching on the same interface is disabled
IP CEF switching is enabled
IP CEF switching turbo vector
IP Null turbo vector
IP multicast fast switching is disabled
IP multicast distributed fast switching is disabled
IP route-cache flags are Fast, CEF
--More--
Not in Bound state.
*Mar 1 01:03:41.113: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewin Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
RTP/IP header compression is disabled
Policy routing is disabled
Network address translation is disabled
BGP Policy Mapping is disabled
Input features: MCI Check

AS per this output there is

Sandeep Choudhary — Fri, 10 Apr 2015 10:24:09 GMT

AS per this output there is no IP address assigned.

AP24e9.b34b.e72d#show ip interface bvI1
BVI1 is up, line protocol is up
Internet address will be negotiated using DHCP

1. Please assign IP address manually to APs Ethernet interface(10.0.0.3/24)

2. Your Laptop must have ip as 10.0.0.5/24

3. Connect laptop and AP via Ethernet cable.

4. If you can ping then run the archive command "

archive download-sw /force-reload /overwrite tftp://10.0.0.5/ c1240-k9w7-mx.124-25d.JA2.tar

Regards

Now i Done Converted to

rameshkrishnan — Fri, 10 Apr 2015 11:39:25 GMT

Now i Done Converted to Autonomous Ios.

Please help in configuring the same in my network

I have a fire wall and it provides the DHCP ip.

Now My AP interface BVI 1 Ip is 172.28.0.230

Every thing got done, same

rameshkrishnan — Fri, 10 Apr 2015 13:04:08 GMT

Every thing got done, same has been deployed in my network.

Thanks For your valuable support Sandeep Choudhary and all other advisers.

Please go through the below

varunag — Wed, 15 Apr 2015 20:10:57 GMT

Please go through the below link for steps for converting the AP to autonomus AP .

http://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/ .

Re: Every thing got done, same

rbaker1963 — Fri, 24 May 2019 02:51:35 GMT

Hi all.

Only new to this. So I have a Air-Cap1602I-N-K9, version info is Software AP1G2 RCVK9W8-M, Version 15.2(2)JB, which I understand is a lightweight, So my question is which Autonomous AP IOS Software/version should I use, and the process to download it.

Cheers

Robert

Re: Every thing got done, same

Sathiyanarayanan Ravindran — Fri, 24 May 2019 03:00:09 GMT

Hi Robert,

You have to download ap1g2-k9w7-tar.153-3.JF9.tar. Here k9w7 refers to a autonomous OS.

Re: Every thing got done, same

rbaker1963 — Fri, 24 May 2019 03:10:01 GMT

Thanks, but when I try to download file I get a "contract required" message. Where can I download it from.

Cheers