topic Please refer to the AIR in Wireless

Can't configure AIR-CAP 1702I

steenborlum — Mon, 05 Jul 2021 09:43:46 GMT

Hi,

I want to try my first cisco product, so I got a AIR-CAP1702I-E-K9.

Directly I got stuck, I have google and google, and everybody just say do this and this, but it won't work on my AP.

I have include a file, with all startup info, and a list off command I can run.

Some tips say run web gui, AP got a IP but will not answer.

Some tips say, login by console, type en and password (Cisco), then run command conf -t, but this command is not there.

On boot I see some errors, on is this "Config load from flash failed. Initialising Cfg".

I'm stuck, any help is welcome.

Thanks

Steen

Stephen Rodriguez — Tue, 17 Mar 2015 15:09:57 GMT

you need to convert the AP from CAPWAP to aIOS. take a look at Rasika's blog post

http://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/

HTH,

Steve

relmoudi1 — Tue, 17 Mar 2015 15:24:38 GMT

To get to global configuration mode at the previ exec mode type

Ap# debug capwap console cli

hit enter,

AP# conf t

you will get

AP(config)#

steenborlum — Wed, 18 Mar 2015 08:31:32 GMT

Hi,

Thanks both of you, I come a bit forward.

I learn also that I need a central configuration HW (more money), is it possible to make this unit a single unit like a normal AP?

How do I enable WEB GUI on this unit?

/Steen

Abhishek Abhishek — Fri, 20 Mar 2015 01:44:10 GMT

Please refer to the AIR-CAP1702I-E-K9 configuration guide-

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1700/quick/guide/ap1700getstart.pdf