topic AIR-CAP1602I-T-K9 in Wireless

AIR-CAP1602I-T-K9

brunoleonardovitoria — Mon, 05 Jul 2021 08:18:29 GMT

Hello.

Can I convert a AIR-CAP1602I-T-K9 from controller-based to stand-alone???

Thank you.

OF course you can.Here's the

Daniel Ordóñez Flores — Fri, 01 Aug 2014 18:35:06 GMT

OF course you can.

Here's the link of the stand-alone image.

http://software.cisco.com/download/release.html?mdfid=284366503&flowid=37523&softwareid=284180979&release=15.2.4-JB5&relind=AVAILABLE&rellifecycle=ED&reltype=latest

do you know how to convert it?

No, please help me.

brunoleonardovitoria — Fri, 01 Aug 2014 18:50:48 GMT

No, please help me.

Sure no problem. First you

Daniel Ordóñez Flores — Fri, 01 Aug 2014 19:30:42 GMT

Sure no problem.

First you need to download the correct image. You can do it in the previous link.

Console tu AP and write this command: debug capwap console cli. Whit this line you you capwap ap will accept the command conf t

then:

conf t

ip default-gateway X.X.X.X

(I recommend that your computer's ip and the default gateway be the same.)

interface g0

ip address X.X.X.X x.x.x.x <-- Your subnet mask

no shut

archive download-sw /force-reload /overwrite tftp://X.X.X.X/c1140-k9w7-tar.124-25d.JA.tar

TFTP X.X.X.X = Your ip computer

c1140-k9w7-tar.124-25d.JA.tar= you need to change it for the correct name.

Your computer and your AP have to be in the same network

Example:

My computer address: 10.10.10.1

conf t 

ip default-gateway 10.10.10.1 

int g0 

ip address 10.10.10.102 255.255.255.0 

no sh

archive download-sw /force-reload /overwrite tftp://10.10.10.1/c1140-k9w7-tar.124-25d.JA.tar

Thank you d.ordonez. I will

brunoleonardovitoria — Mon, 04 Aug 2014 14:10:24 GMT

Thank you d.ordonez.

I will go to try to do this conversion.

Thank you for help me.

You're welcome.***Please rate

Daniel Ordóñez Flores — Mon, 04 Aug 2014 15:15:44 GMT

You're welcome.

***Please rate the answer if this information was useful***