topic Re: Replace a failing WiSM in Wireless

Replace a failing WiSM

James.Longman — Sun, 04 Jul 2021 06:12:21 GMT

All,

How do I backup and restore the config in a WiSM? I thought this would be easy to lookup, but so far no joy!

I assume I just shut the module down, pull it out, push the new (with the chassis still up) it's just the backup/restore I'm unsure on.

Cheers!

Replace a failing WiSM

George Stefanick — Mon, 10 Dec 2012 22:29:45 GMT

Hi James,

If you have WCS / NCS and you back up the config in a normal scheduled task. If you dont, you would go to commands and download / upload the 'config'

Yes. Shut power, pull out. Put new blade in and turn on. Double check the etherchannels and load the code. Also rememeber to add the new controller in the mobility group of the old / existing controllers, as the MAC is different.

Certificates and web pages arent copyed when you do the config. So if you will need to update these if needed onto the new controller.

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

Replace a failing WiSM

James.Longman — Tue, 11 Dec 2012 06:57:19 GMT

So, if there's WCS/NCS simply replacing the physical unit and updating to WCS to know of the new MAC that's it and a restore can be performed from teh WCS?

I assume when you say double check the etherchannels those are the channels the chassis uses to reach the card and if that was working before it would be OK now?

I had assumed (totally new to this) there would be some config on the WiSM itself I would have to update via the console port first.

Re: Replace a failing WiSM

George Stefanick — Tue, 11 Dec 2012 13:48:13 GMT

Your asked how you can back up the config. Wcs ncs I one way or manually pull it with tftp.

As for the MAC address, I'm speaking to the mobility group specifically.

Sent from Cisco Technical Support iPhone App

Replace a failing WiSM

Scott Fella — Tue, 11 Dec 2012 15:19:52 GMT

Here are some links to look at:

https://supportforums.cisco.com/thread/2056957

http://www.cisco.com/en/US/docs/wireless/technology/controller/deployment/guide/dep.html#wp1064769

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

Replace a failing WiSM

James.Longman — Fri, 14 Dec 2012 11:50:31 GMT

Thanks both, top answers!