topic Mounting a WAP321 in Wireless https://community.cisco.com/t5/wireless/mounting-a-wap321/m-p/2023164#M158171 <P>We'd like to mount several WAP321 Access Points in our new building.&nbsp; Does it make a difference if they are mounted horizontally or vertically?&nbsp; It would be easier to mount them on walls, but would that provide coverage across a floor of the building, or will it reduce coverage?&nbsp; Thanks!</P> Sun, 04 Jul 2021 05:53:08 GMT salamdahbour 2021-07-04T05:53:08Z Mounting a WAP321 https://community.cisco.com/t5/wireless/mounting-a-wap321/m-p/2023164#M158171 <P>We'd like to mount several WAP321 Access Points in our new building.&nbsp; Does it make a difference if they are mounted horizontally or vertically?&nbsp; It would be easier to mount them on walls, but would that provide coverage across a floor of the building, or will it reduce coverage?&nbsp; Thanks!</P> Sun, 04 Jul 2021 05:53:08 GMT https://community.cisco.com/t5/wireless/mounting-a-wap321/m-p/2023164#M158171 salamdahbour 2021-07-04T05:53:08Z Re: Mounting a WAP321 https://community.cisco.com/t5/wireless/mounting-a-wap321/m-p/2023165#M158173 <HTML><HEAD></HEAD><BODY><P>That ap is meant to be mounted on the ceiling or on a mount that allows it to be horizontal. You might be able to use one of these.<BR /><BR /><A href="http://www.oberonwireless.com/WebDocs/Model1029-00_Spec_Sheet.pdf" target="_blank">http://www.oberonwireless.com/WebDocs/Model1029-00_Spec_Sheet.pdf</A><BR /><BR />Sent from Cisco Technical Support iPhone App</P></BODY></HTML> Sun, 21 Oct 2012 14:03:33 GMT https://community.cisco.com/t5/wireless/mounting-a-wap321/m-p/2023165#M158173 Scott Fella 2012-10-21T14:03:33Z Re: Mounting a WAP321 https://community.cisco.com/t5/wireless/mounting-a-wap321/m-p/2023166#M158174 <HTML><HEAD></HEAD><BODY><P>We'll mount them horizontally.&nbsp; That shouldn't be a problem.&nbsp; Thanks for quick reply!</P></BODY></HTML> Sun, 21 Oct 2012 17:41:22 GMT https://community.cisco.com/t5/wireless/mounting-a-wap321/m-p/2023166#M158174 salamdahbour 2012-10-21T17:41:22Z Re: Mounting a WAP321 https://community.cisco.com/t5/wireless/mounting-a-wap321/m-p/2023167#M158175 <HTML><HEAD></HEAD><BODY><P>AP's with external antennas allow you to mount the AP's vertically on the wall. These internal antenna access points are meant just for horizontal mounting.<BR /><BR />Thanks for using the rating system.<BR /><BR />Sent from Cisco Technical Support iPhone App</P></BODY></HTML> Sun, 21 Oct 2012 18:17:43 GMT https://community.cisco.com/t5/wireless/mounting-a-wap321/m-p/2023167#M158175 Scott Fella 2012-10-21T18:17:43Z