topic AIR-CABs doubt!!! in Wireless

AIR-CABs doubt!!!

Jose Juan Bruno Munoz — Sun, 04 Jul 2021 02:32:35 GMT

Hello everybody,

I am facing a wifi project and have to connect the following items,

- An AIR-BRG1310G-E-K9-R AP to an AIR-ANT24120 antenna

- Two AIR-BR1310-E-K9-R to their AIR-ANT1949 antennas,

I do not know which cable to use in both cases. I have seen AIR-CAB005LL-R and AIR-CAB005LL-N but don't know their differences and if they would meet my requirements. Can you help me to find a suitable solution? and which is the diference between LL-R and LL-N?.

Thanks in advanced

Re: AIR-CABs doubt!!!

Surendra BG — Mon, 13 Dec 2010 16:44:58 GMT

Hi Jose,

AIR-CAB005LL-N = 5-ft low loss cable, one straight N connector, one 90-degree N connector

AIR-CAB005LL-R = 5-ft low loss cable, one RP-TNC plug, one RP-TNC jack

So the device that we are using is AIR-BRG1310G-E-K9-R ... here "R" represents RP-TNC connectors.. so the cable that we needto use is AIR-CAB005LL-R

AIR-CAB005LL-N is used for N type male connectotr and usually used for 1410 bridge..

lemme know if this answered your question..

Regards

Surendra

===

Please dont forget to rate the post which answered your question or was usefull

Re: AIR-CABs doubt!!!

Jose Juan Bruno Munoz — Mon, 13 Dec 2010 16:54:57 GMT

Thank you Surendra!! I will work on that.