topic Although best practice is to in Wireless

hotel wifi solution

ekadsoft1 — Mon, 05 Jul 2021 12:14:13 GMT

we need to construct wifi network for new hotel consists of 10 floors ;each floor have 48 room.

how can we make perfect coverage for each floor ?

which devices should we use ( AP , switches , WLC, and etc.) ?

how can I make site survey to plan this network ? I need tools from Cisco.

note : maximum capacity 1500 users ; also I well attach the hotel blueprint.

Refer this document to start

Rasika Nayanajith — Wed, 15 Jun 2016 23:50:30 GMT

Refer this document to start with

http://www.wlanpros.com/wp-content/uploads/2015/06/Rules-for-Successful-Hotel-Wi-Fi.pdf

how can I make site survey to plan this network ? I need tools from Cisco.

Then you need to do a site survey for a suitable AP model that fulfill customer requirement. You can use tool like Ekahau. There are no cisco tools for this.

http://www.ekahau.com/wifidesign/ekahau-site-survey

From this forum, you cannot expect a solution design for your customer requirement, but can get some advice for specific concerns you have.

HTH

Rasika

*** Pls rate all useful responses ***

Do a site survey:http://www

mohanak — Thu, 16 Jun 2016 03:44:41 GMT

Do a site survey:http://www.cisco.com/networkers/nw03/presos/docs/CLP-1030.pdf

Although best practice is to

Joshua Messenger — Thu, 16 Jun 2016 16:02:12 GMT

Although best practice is to perform a wireless survey to find the noise floor and interference within a building. If you need to estimate at a high level the number of access points for generic coverage take a look at:

http://baud9600.com/Calculators/RF-AP-Deployment-Estimator.html