https://community.cisco.com/t5/wireless/add-controller-in-cisco-prime/m-p/3008906#M1600 <P>Hello guys</P> <P>When I add a controller in Cisco Prime all the access points that the controller manages are added automatically? Or I have to manually add one by one?</P> <P>My problem is that when I try to add an access point with the snmp community that I configured in the controller the following error appears: "Verification of one or more of the following fields failed: SNMP read community, SNMP write community.</P> <P></P> Mon, 05 Jul 2021 13:44:05 GMT pedromenezes 2021-07-05T13:44:05Z https://community.cisco.com/t5/wireless/add-controller-in-cisco-prime/m-p/3008906#M1600 <P>Hello guys</P> <P>When I add a controller in Cisco Prime all the access points that the controller manages are added automatically? Or I have to manually add one by one?</P> <P>My problem is that when I try to add an access point with the snmp community that I configured in the controller the following error appears: "Verification of one or more of the following fields failed: SNMP read community, SNMP write community.</P> <P></P> Mon, 05 Jul 2021 13:44:05 GMT https://community.cisco.com/t5/wireless/add-controller-in-cisco-prime/m-p/3008906#M1600 pedromenezes 2021-07-05T13:44:05Z https://community.cisco.com/t5/wireless/add-controller-in-cisco-prime/m-p/3008907#M1601 <P>once you will add a controller in prime, all APs assosciated to that WLC will be in prime as well.</P> <P></P> <P>Regards</P> <P>Dont forget to rate helpful posts</P> Thu, 23 Mar 2017 06:58:51 GMT https://community.cisco.com/t5/wireless/add-controller-in-cisco-prime/m-p/3008907#M1601 Sandeep Choudhary 2017-03-23T06:58:51Z