topic speed setting? in Wireless https://community.cisco.com/t5/wireless/speed-setting/m-p/1180901#M160834 <P>I have two 1310 bridges, point to point, aprox 2.5 miles, clear line of sight. During heavy fog the link goes down and does not come back up.</P><P></P><P>I noticed the speed setting was set to </P><P> speed basic-1.0 basic-2.0 basic-5.5 basic-11.0</P><P></P><P>(speeds above 11.0 never worked so that's the highest I set the speed to)</P><P></P><P>I also see you can set the speed to just plain</P><P></P><P> 1.0 2.0 5.5 11.0</P><P></P><P>What's the difference between the basic-&lt;speed&gt; setting and the setting without the basic- prefix?</P> Sat, 03 Jul 2021 23:58:42 GMT rrfield 2021-07-03T23:58:42Z speed setting? https://community.cisco.com/t5/wireless/speed-setting/m-p/1180901#M160834 <P>I have two 1310 bridges, point to point, aprox 2.5 miles, clear line of sight. During heavy fog the link goes down and does not come back up.</P><P></P><P>I noticed the speed setting was set to </P><P> speed basic-1.0 basic-2.0 basic-5.5 basic-11.0</P><P></P><P>(speeds above 11.0 never worked so that's the highest I set the speed to)</P><P></P><P>I also see you can set the speed to just plain</P><P></P><P> 1.0 2.0 5.5 11.0</P><P></P><P>What's the difference between the basic-&lt;speed&gt; setting and the setting without the basic- prefix?</P> Sat, 03 Jul 2021 23:58:42 GMT https://community.cisco.com/t5/wireless/speed-setting/m-p/1180901#M160834 rrfield 2021-07-03T23:58:42Z Re: speed setting? https://community.cisco.com/t5/wireless/speed-setting/m-p/1180902#M160835 <HTML><HEAD></HEAD><BODY><P>the "basic" speeds are the required speeds a client must support to be able to connect to the device. All others are considered "supported", meaning if we can negotiate to them, great! if not, then that's ok too.</P></BODY></HTML> Mon, 12 Jan 2009 16:32:11 GMT https://community.cisco.com/t5/wireless/speed-setting/m-p/1180902#M160835 Stephen Rodriguez 2009-01-12T16:32:11Z