Autonomous & Capwap image

Prasan Venky — Mon, 05 Jul 2021 07:43:44 GMT

Hello,

I have loaded k9w7 & k9w8 images into the flash of 1552H outdoor accesspoint from ap: mode using "tar -xtract tftp:" back to back.

Now my requirement is, whenever i want to switch to lwap or standalone mode, i just go to ap: mode and set boot as k9w7/k9w8 image and boot.

So that it will boot as lwap mode or standalone mode without the need of transferring again into the flash.

Here i uploaded both the images into flash and first booted with lwap image(k9w8). Then i wanted to boot with standalone image(k9w7). so i went to ap: mode and typed boot flash:/<dir name>/<file of k9w7>.

It shows,

Loading "flash:/...." ...####

File "flash:/..."

It still boots with the k9w8 only.

Can anyone tell me how to do it.?

Error isLoading "flash:/c1520

Prasan Venky — Wed, 23 Apr 2014 08:42:49 GMT

Error is

Loading "flash:/c1520-k9w7-mx.152-4.JB4/c1520-k9w7-xx.152-4.JB4"...Bootable image segment 0 address range [0x3000, 0x1d0d1f8] not in range.

topic Error isLoading "flash:/c1520 in Wireless

Autonomous & Capwap image

Error isLoading "flash:/c1520