topic Re: BR350 problem with MIC/TKIP in Wireless https://community.cisco.com/t5/wireless/br350-problem-with-mic-tkip/m-p/132690#M161090 <HTML><HEAD></HEAD><BODY><P>What version of firmware is on each bridge ?</P></BODY></HTML> Sun, 10 Aug 2003 00:58:22 GMT derwin 2003-08-10T00:58:22Z BR350 problem with MIC/TKIP https://community.cisco.com/t5/wireless/br350-problem-with-mic-tkip/m-p/132689#M161089 <P>I have two BR350's that communicate with each other fine until I enable MIC/TKIP. 128-bit WEP encryption is set for Full Encryption. Once MIC is set to MMH and TKIP is set to Cisco, I loose connectivity between the two bridges. I have one bridge as the root-bridge, and the other bridge as client bridge w/o clients. I have restored the settings back to their original state, but they are still unable to communicate. The only way I can re-establish communication is to restore the Bridges back to factory default and setup with WEP. Any ideas on what I am missing here?</P> Sun, 04 Jul 2021 15:55:39 GMT https://community.cisco.com/t5/wireless/br350-problem-with-mic-tkip/m-p/132689#M161089 pallette 2021-07-04T15:55:39Z Re: BR350 problem with MIC/TKIP https://community.cisco.com/t5/wireless/br350-problem-with-mic-tkip/m-p/132690#M161090 <HTML><HEAD></HEAD><BODY><P>What version of firmware is on each bridge ?</P></BODY></HTML> Sun, 10 Aug 2003 00:58:22 GMT https://community.cisco.com/t5/wireless/br350-problem-with-mic-tkip/m-p/132690#M161090 derwin 2003-08-10T00:58:22Z