https://community.cisco.com/t5/wireless/flexconnect-wlan-vlan-mapping-native-vlan/m-p/3190749#M161318 <P>Hi,</P><P>&nbsp;</P><P>In FlexConnect groups, does the Native VLAN need to be the same as native VLAN on the switch the APs are connected to?</P> Mon, 05 Jul 2021 14:42:04 GMT dot1x 2021-07-05T14:42:04Z https://community.cisco.com/t5/wireless/flexconnect-wlan-vlan-mapping-native-vlan/m-p/3190749#M161318 <P>Hi,</P><P>&nbsp;</P><P>In FlexConnect groups, does the Native VLAN need to be the same as native VLAN on the switch the APs are connected to?</P> Mon, 05 Jul 2021 14:42:04 GMT https://community.cisco.com/t5/wireless/flexconnect-wlan-vlan-mapping-native-vlan/m-p/3190749#M161318 dot1x 2021-07-05T14:42:04Z https://community.cisco.com/t5/wireless/flexconnect-wlan-vlan-mapping-native-vlan/m-p/3190767#M161319 <P>Hello,</P><P>&nbsp;Yes, it is.</P><P>O doc below, you can see that the same native vlan configured on Switch will be used for configure the AP side.</P><P>&nbsp;</P><P><A href="https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-2/config-guide/b_cg82/b_cg82_chapter_010010101.html" target="_self">https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-2/config-guide/b_cg82/b_cg82_chapter_010010101.html</A></P> Thu, 28 Sep 2017 03:33:58 GMT https://community.cisco.com/t5/wireless/flexconnect-wlan-vlan-mapping-native-vlan/m-p/3190767#M161319 Flavio Miranda 2017-09-28T03:33:58Z